The efficient operation of the wheat roller flour mill machine is inseparable from standardized daily maintenance. This key link directly determines the service life and processing quality of the equipment. As a professional flour machinery manufacturer, Hanzhong Burt Machinery combines industry experience to sort out the core points of equipment maintenance for you.
wheat roller flour mill
① Always pay attention to the tightness of the conveyor belt. If the belt is too loose, it is easy to reduce the transmission efficiency and then affect the use effect; but if it is too tight, it is very easy to cause the bearing to overheat, which will not only increase power consumption, but also greatly reduce the service life of the transmission belt.
Bearing temperature should also be paid attention to. If the temperature is too high, it is necessary to promptly investigate the cause, check whether the lubrication and transmission parts are normal, and actively take corresponding measures to solve it. If the situation is serious, the machine should be stopped for inspection immediately.
② The transmission parts must be firm and smooth. When disassembling and installing, special tools must be used correctly to avoid using hammers and other tools to directly hit the fuselage and cause unnecessary damage to the fuselage.
If you encounter the problem of cleaning the wheat flour mill plant during use, you should pay attention. Usually, the primary processed flour needs to be cleaned, and then the coarse powder is separated. When producing flour, re-cleaning is an indispensable process and needs to be re-cleaned. The screened material in the front and middle sections of the powder cleaning machine is relatively pure. As the material in the back and middle sections gradually decreases, the material layer becomes thinner and thinner, which is easy to be blown through, resulting in impure screened material and fine bran stars.
In addition, if the temperature of the flour is too high, it is necessary to properly loosen the gap of the grinding roller and check it regularly. If there is wear, it needs to be cleaned or replaced in time, especially now that it is a hot summer, and more attention should be paid to the heat dissipation of the machine.
At the same time, if the windshield of the mill flour machine makes an abnormal sound, it is closely related to the compliance of the windshield. This is because the welding point is rough during the processing of the flour machine, the edge of the small mouth of the windshield is inconsistent, and it often rubs against the end of the rotor during assembly.
Here is a warm reminder to everyone that during the production process, pay attention to some small abnormalities of the wheat flour milling machine as much as possible, check and eliminate them in time to avoid unexpected situations.
